Step by step tutorial on how to create a new NRTK profile
1.
Instrument
If the Handheld Controller/logger isn’t already connected to the GS sensor. Kindly follow the steps to connect.
If it is skip step.
2.
Connections…
3.
GS connection wizard.
4.
Select particular GS Sensor being used.
F1-Next.
5.
Bluetooth.
F1-Next.
6.
F1-Next to search for the antenna.
7.
F1-Next.
F4-Search if device not found.
8.
F1-Finish.
Restart Leica Viva SmartWorx from the desktop.
9.
Instrument.
10.
GPS settings…
11.
RTK rover wizard
12.
“SmartNet Main”
“SmartNet Backup”
SmartNet is a Network Real-Time Kinematic service
13.
Internet.
14.
Internal 3.5G modem.
Use UMTS network if available.
13.
– – – – –
– – – – –
16.
Using GPRS/CDMA Internet con-nection
17.
APN’s:
vodafone: internet
O2: mobile.o2.co.uk
Orange: orangeinternet
T-Mobile: general.t-mobile.uk
BT Mobile: btmobile.bt.com
18.
Network User ID & Password
vodafone: web / web
O2: faster / password
Orange: blank / blank
T-Mobile: user / wap
BT Mobile: bt / bt
19.
Either wait for it to test the internet connection, or cancel until the ‘RTK rover wizard’ is complete
20.
SmartNet Main
217.146.121.50
7801
SmartNet BackUp
213.120.255.90
7801
21.
Enter mountpoint manually.
22.
MAX-RTCMv3
i-Max can be used when the inter-net signal is poor. Change the ‘Network type to i-MAX too.
I-MAX-RTCMv3
23.
Receive RTK corrections from RTK.
Network type: MAX.
Send GGA message.
24.
RTK data format: RTCM v3
Behaviour: “Show only”
81.
Go to Work!
82.
Survey.
83.
F12 to connect to SmartNet.
FUNC Connect/Disconnect GSM.
84.
Wait for “steering wheel” icon to re-duce to a “cross”. You are now working at 20mm accuracy. Every 6 seconds 2 ticks will appear (SmartCheck).
