This quick guide is to show how to load data from USB on MC1.

On your USB you will need a folder called ‘Projects’ within the ‘Projects, folder you will need a sub folder with the project name, for this guide I have called my project ‘Demo’.

Copy your design data into this folder, for this demo I am going to upload a AutoCAD DXF and a TRM triangulated model.

See below.

Once the files are on the USB in the correct location plug the USB into the port on the front the MCP80 machine control panel.
Press the menu button as shown

Press the Sync button.

Press the ‘Sync’ button next to Synchronize USB.

When this is complete press the tick button in the bottom right.
The data is now loaded onto the screen.

Was this article helpful to you?